InterTech M1075 – for unsurpassed leak testing speed and accuracy

Posted by:

An InterTech Design Report

Our diesel engine mass flow technology shortens test cycle time by finding leaks faster to enhance manufacturing efficiency and process – significantly. Download the full report in a PDF format at:DR129_R1

The Challenge

Develop a production line solution to detect and repair leaks prior to hot testing. Eliminate the possibility of leak-associated defects getting through the system. Deliver accurate results in seconds, while not wasting time and money on hot test repeats.

InterTech M1075 – for unsurpassed leak testing speed and accuracy - using Mass Flow, Pressure Decay & Differential Pressure Testing

InterTech M1075 – for unsurpassed leak testing speed and accuracy

The InterTech Solution

InterTech M1075 dry air tests both the water side and the oil side of an engine block at the same time, up to twice as fast as other available options.

The water side includes engine block passages, water pump, heater housing, thermostat housing, associated hoses and the coolant half of the lube-oil cooler, creating a cavity of about 12 liters. The oil side includes engine block passages plus, front and rear gear fly wall housings, crankshaft seals, oil pan, intake manifold and the oil half of the lube-oil cooler.

This creates a cavity of up to 180 liters depending on engine model. The InterTech testing system avoids problems of pressure fluctuation in the supply line by using isolated air reservoirs. Because it is independent of plant air supply, it provides a direct and stable measurement of leakage.

The InterTech system simultaneously pressurizes both cavities and the reservoirs: the oil cavity to 2.5 psi with a reject limit range of .2 lpm to1.4 lpm (user selectable); and the water cavity to 10 psi with a reject limit of 25 sccm.

Any leakage causes the leaking cavity to lose pressure and the InterTech mass flow transducer reads the flow rate.

 

For a customised quote for your leak testing problems, contact our Indian office in Chennai at 044 – 4211 2525 / +91 994 032 0718 / +91 98409 14544

You may also email our Sales Reps in India at ajay@intertechdevelopment.com / ram@intertechdevelopment.com

0

Create a Sustaining and Compliant QMS for Regulatory Challenges.

Posted by:

Medical device regulatory has never been more challenging.  That’s why developing a compliant, sustaining and effective QMS – for multiple regulatory environments – is critical.

 InterTech Development Company, a world leader in device testing, is pleased to be a lead sponsor of an important webinar on this vital issue, presented by Assembly Magazine.

 InterTech invites you to view this important presentation, featuring Christopher J. Devine, President, Devine Guidance International, Inc.

 Link into this timely QMS System webinar, presented by Assembly, and sponsored by InterTech – click here

 

0